Description
DESCRIPTION
Nexans LANmarkOF MTPMTP patch cords have been designed for indoor applications in support of parallel optics, i.e. 40GBaseSR4 and 100GBaseSR4.
Details on the supported distances can be found in the LANmarkOF warranty modules.
Typical installation environments are data centres:
• Connections from patch panels to the active equipment
• Cross connects
Nexans LANmarkOF MTP patch cords are delivered as straight patch cords with a key up key up design. The patch cords are delivered with female MTP* PRO connectors.
For ease of patching the MTP PRO connector has a short boot length of 17mm. With the tool in the LANmarkOF Tool MTP PRO Sample Box (N890.160) the gendre and polarity of the patch cords can be changed
• Gendre can be changed to male with the pins of product N890.161
• The polarity can be changed to a key up – key down design.
The patch cords are available with LANmarkOF OM4 performance. Details on the fibre specifications can be found in the detailed fibre datasheets.
The typical value for the insertion loss for a multimode MTP connection is 0,125 dB.
The limit value for a multimode MTP connection is 0,25 dB measured according to standard IEC 61300345. The minimum return loss for a multimode MTP connection is 20 dB measured according to IEC 6130036.
Mechanical characteristics of the PreTerm are conform to the IEC 6079420 standard for indoor cables. The small diameter of 2.5 mm and the small bend radius of 30mm the cable facilitates the patching in densely populated areas in the data centre.
The length between the 2 MTPconnectors is variable and can be increased in steps of 1m. The “X” in the Nnumber equals Xm.
* MTP is a trade name of US Conec.
