Alcatel-Lucent OmniSwitch 6850 POE Chassis Bundles OS6850-P48

Part Number: OS6850-P48

OS6850-P48: Gigabit Ethernet L3 fixed configuration PoE chassis in a 1U form factor with 44 RJ-45 PoE ports individually configurable to 10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two dedicated stacking ports. On the combo ports, either copper or fiber can be used on a one for one basis. The bundle includes a 360W AC PoE power supply with power shelf, United States power cord, user manuals access card, rack mounts and RJ-45 to DB-9 adaptor.

Mô tả	Khả năng đáp ứng
Total unshared 10/100/1000BASE-T PoE ports per switch (ports 5 –48)	44
Total shared 10/100/1000BASE-T PoE “combo” portsper switch (ports 1-4)	4
Total shared 1000BASE-X “combo” ports per switch (ports 45-48)	4
Total 10/100/1000BASE-T ports per stack	384 (stack of eight switches)
Total combo SFP slots per stack	32 (stack of eight switches)
Power Supply	AC-to-DC 510W output P/S or AC-to-DC 360W output P/S
Flash Memory size	64MB
RAM Memory size	256MB SDRAM
Overall Width (rack-mount flanges included)	19 inches, approx.
Chassis Width (rack-mount flanges not included)	17.5 inches
Height	1.5 inch
Height (rack units)	1 RU
Chassis Depth	10.5 inches without power supplies installed16.75 inches with power supplies installed.
Weight	14 lbs. (6.24 kg) without the power supply
Humidity	5% to 90% Relative Humidity (Operating)0% to 95% Relative Humidity (Storage)
Operating Temperature	0 to 45 degrees Celsius
Storage Temperature	-20 to 70 degrees, Celsius
Altitude	Operating altitude: sea level at 40 degrees, Celsius and 10000 feet at 0 degrees, Celsius Storage altitude: sea level to 40000 feet
Standards supported	802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u, IEEE 802.3af (DTE Power via MDI MIB); IAB RFCs 826, 894
Data rate (RJ-45 Ports)	10 or 100Mbps (full or half duplex)1 Gigabit per second (full duplex)
Data rate (SFP ports)	1 Gigabit per second (full duplex)
Maximum frame size	9,216 bytes
Connections supported	10/100/1000BASE-T and 1000BASE-XIP- phones, Bluetooth Access Points, Internet cameras, and other devices requiring power over Ethernet
Cables supported	10BaseT: unshielded twisted-pair (UTP)100BaseTX: unshielded twisted-pair (UTP), Category 5, EIA/TIA 568 or shielded twisted-pair (STP), Category 5, 100 ohm1000BaseT: unshielded twisted-pair (UTP), Category 5e
PoE Power supplied to port	Default 15.4watts per portConfigurable from 3watts to 15.4watts per portUsing the 360watts P/S, the maximum available PoE power is 240 watts (less 1watt per port of overhead) per unit.Using the 510watts P/S, the maximum available PoE power is 390watts (less 1watt per port of overhead) per unit.Please refer to the Power Supply Specification Section for more details.
Maximum cable distance (RJ-45 ports)	100 meters